Are you experiencing problems with your electric bike? Yes, we know how painful this situation can be; however, you are not alone.
The problems with your electric bicycle could be fixed by getting service from your manufacturers support facility, but that way often means losing access to your ride for a few days to weeks.
Here are some DIY solutions to diagnosing and fixing your bicycle:
Table of Contents
- Why Is My Electric Bike Not Working?
- How Do I Fix My Electric Bike?
- 1. Get The Right Type Of Electric Bike
- 2. Charge Up Your Battery For Every Ride
- 3. Hub Motor Causing Issues
- 4. Get Comfortable With Your Dashboard Setup
- 5. Tire Pressure Plays Huge Role In A Smooth Ride
- 6. Know The Best Power Mode To Maximize Your E-Bike Range
- 7. Don’t Look Wary, Be Confident
- 8. Going Uphill, Seat Down First
- 9. Test Your Brakes
- 10. Be Cautious Always
- 11. Understand The Power Of An Electric Bike Throttle
- 12. Respect Others On The Road
- 13. Are The Lights On?
- 14. Learn To Read The Road Surface
- 15. Patience Is Key
Why Is My Electric Bike Not Working?
If you’re dealing with issues on your electric bike, you may consider checking these specific parts of your electric bicycle to see where the issue lies.
Key places where problems arise from most common to least common:
- Battery Pack and Batteries
- Hub Motor
- Speed Sensors
- Charging from plug and outlet
- Electric Bike Controller
- Throttle & Wires
How Do I Fix My Electric Bike?
To fix your electric bike often means to replace a part of the bike like the hub motor or throttle or complete battery pack. This can work if you know your way around sourcing new parts and the people that can help you accomplish this.
We will be going through our typical replacement steps for electric bikes and the products that can solve your problem.
1. Get The Right Type Of Electric Bike
Buy the right type e-bike that suits your activity and your budget.
It makes a huge difference in the long term. There are a few different types of e-bikes out on the market. Electric mountain bikes, beach cursors, and foldable bikes just to name a few each have their own benefits.
An example would be mountain e-bikes, typically has a mid-drive, made to eat up steep hilly mountainous terrain.
You’ll experience amazing torque but on the other hand an electric beach cursor is lot more easy going.
Often sporting a rear hub drive motor, crafted to grip and maneuver steadily through the road. Understanding the type of e-bike you have caters into its overall performance.
You’ll be able to navigate various terrain without compromising or damaging your e-bike.
2. Charge Up Your Battery For Every Ride
In order to take advantage of certain features like pedal-assist or the throttle, it’s important to have a fully charged battery. Topping off your battery before the ride is a good idea.
However, make sure that you aren’t endangering your battery through over-charge or letting it drain to zero constantly. The battery pack on an electric bike is just like the one on an iPhone and it doesn’t help to push it to its limit.
The problem may require you actually purchasing more batteries for your electric scooter which is not cheap.
First meaningful change of an external battery pack will extend your electric bike life and distance of ride.
You may want to consider a few of these battery packs to choose when you decide.
3. Hub Motor Causing Issues
If you have high mileage on your electric bicycle, dependent on the brand like Ancheer, you can face hub motor issues that will need to involve bringing the big tools like your entire wrench tool kit.
Motor and wheel issues like your motor bearings or bottom bracket bearings are often replaced every 2-3 times a year especially if you are riding a lot of miles.
If you are still under warranty and you’re hearing motor noises, then take your bike back to the dealer to get the motor bearings replaced.
Avoid digging to solve the problem while in the warranty because this would invalidate warranty immediately.
4. Get Comfortable With Your Dashboard Setup
The cockpit or the dashboard area of the electric bike houses important components. Housing the breaks, gear levers, power modes, and the LCD display.
All these different components hosted in this area greatly influences the way cyclist move.
Finely tuning and getting the right setup just contributes to a smoother ride. No funny angles, nothing out of reach or out of place. You want a setup that is comfortable, allowing for maximum performance.
Before you hit the road take a look at the weather forecast. In doing so, you know the best time to leave your home to avoid inclement weather. You can be prepared ahead of time with a raincoat or boots.
The obvious items like a bike locks and pump is necessary for every ride. But what about non traditional items?
Having a list on your phone or written on paper ensures that you slowly check off what you’ll need for a bike ride.
5. Tire Pressure Plays Huge Role In A Smooth Ride
There isn’t a correct tire pressure to have on an electric bike. We all ride and weigh differently; not to mention cycle through different terrain. This greatly impacts how your bike will perform.
So, checking your tire pressure before you ride is best practice. Printed on the side of bicycle tires is the maximum pressure.
It’s recommended that you keep your tire pressure around there. If you’re having a hard time finding those numbers good range is between 25 to 30 PSI.
It maximizes your e-bike range, helps with acceleration and gives a better grip on the road.
6. Know The Best Power Mode To Maximize Your E-Bike Range
Manufacturers design e-bikes and motors behave differently. What typically stays the same are power E-bike modes. Power modes range from low-level pedal-assist to high assist.
The use of a low power mode means your electric bike will have a longer range. A good place to start is at that low-level power assist.
As you continue to ride fluctuate between different power modes. Based on the conditions your electric bike is riding through you can adapt to the right power mode.
7. Don’t Look Wary, Be Confident
Ride with confidence because others will perceive you as a non-threatening rider. This especially true when you’re riding in high traffic areas. Swaying around on pedal assist from inside to the outside of the bike lane isn’t a good idea.
It’s easy for a bike to stray a small distance to make drivers over correct themselves.
So, when you ride with a purpose its benefits others around you and in general will keep you safe. Ride with confidence, know your space, speed, route, and skills.
8. Going Uphill, Seat Down First
Riding up steep hills with a conventional bike is the worse. Standing on the bike pedals as you crank, rocking your body back and forth until you get to the top.
Most of the times cyclist give up and get off the bike walking it up. Electric bikes take away this pain with pedal assist.
A good tip to follow when you’re riding up steep hills with an electric bike is to sit down and pedal. When you’re seated you get more traction from the rear wheel.
9. Test Your Brakes
E-bike riders are constantly accelerating and braking. This acceleration is quicker than a conventional bike. This plays a role in an electric bike breaking or stopping distance.
It’s the distance an electric bike covers from the time of the full application of its brakes until it has stopped moving.
They are other components to consider. Example, how long it may take a rider to react before squeezing the breaks.
Either way, it’s important to have good breaks. Bad breaks can mean the difference between a collision or a close call. In order to avoid potential dangers proficiently, test out your breaks.
Get on an empty lane, ride as fast you can with assistance or throttle, and slowly squeeze the breaks. Do that a few times to get a feel for your braking distance.
It’s a very nice test, allowing you to find out your e-bikes stopping capabilities. Over time you’ll figure out the bite point for the breaks. How well the tire grips the road, properly slowing down your e-bike.
10. Be Cautious Always
Expect the unexpected from traffic, weather, punctures, and accident. Just like traditional bikes, e-bikes come with their own issues. Puncture tires or popped chains are par for the course.
Expect this to happen at any moment and moving at top speeds the impact felt is greater.
E-bikes typically move at speeds ranging from 20 mph. So, being able to make split decisions in seconds is important.
Also, bad weather conditions create a dangerous environment for everyone involved. They also contribute to traffic jams and drivers taking risks on the road.
You can’t predict what everyone on the road will do, so caution is the only thing to take. We another post that expands more on the topic and it’s supported by other tips. Read More Here.
11. Understand The Power Of An Electric Bike Throttle
The throttles are great, it’s added boost speed without the use of pedaling. Not every bike comes with a throttle. If your e-bikes do make sure you pay attention to the throttle’s placement. Is it a flip the switch, half grip, or full handle twist?
Depending on the type at a dead stop you rotate the throttle by accident and the e-bike takes off by surprise. In some cases, the throttle can be triggered by getting on or off the bike.
Electric bikes do come with motor inhibitors that prevent this from occurring. A good tip is to hold onto the break as you’re getting on or off an e-bike.
12. Respect Others On The Road
Just because you use an e-bike, doesn’t mean everybody will automatically yield to you. Respect anyone else, from trucks, buses, cars, even squirrels. Staying off paved ways.
Don’t upset pedestrians or other road users is good etiquette. It also prevents potential hazards from popping up nowhere.
13. Are The Lights On?
Have lights powered on if riding at night or in reduced visibility. It illuminates the trail you’re cycling through.
It’s also good for safety reason. The flickering of lights and the movement the human body.
Will works effectively in alerting everyone around you. In cases where you’re moving too fast during the day or night, and you can’t be seen.
14. Learn To Read The Road Surface
Different terrains bring forth their own challenges. If you find yourself tackling steep hills or tough mountain trails being able to adjust is key.
Floating above your seat, knees partially bent will serve you well against bumpy trails. In other cases, leaning back, with hands-on the brake leaver is a better strategy for going downhill.
In most cases riders can see the road ahead. Dirt, gravel or urban road surface require different riding styles.
Gravel road: Stay loose and relaxed. Look for the smoothest part to navigate through. A bit of foresight will serve you well, keep your hands firmly on the handlebars. Staying lose will help you absorb the vibrations.
Dirt road: When riding on dirt roads it’s important to pick good lines and avoiding hazards. Take corners wider and make sure to have hands hovering over the break.
Urban road surfaces: These surfaces are your normal asphalt or concrete roads. More comfortable to ride, requiring lower energy output.
Slick roads or wet roads: Slick roads are unpredictable. Be vigilant and regulate your speed. Hands will be on the brakes as your making any quick movements. Electric bikes are faster than traditional bikes. Any abrupt movements or changes of speed will be more impactful on wet surfaces.
There is great source Here that real touches a bit more on the subject.
15. Patience Is Key
Sharing the road with your fellow motorist isn’t easy. There are so many distractions and bad drivers to contend with. It takes a lot of patience to ride an electric bike on the road.
Keeping a calm head at all times is an understatement.
Smile when somebody screws up on the road. Road rage doesn’t get you anywhere it will only kill your joy.